STEERING SPINDLES

3/4″ Axle Steering Spindle Set,
Brackets, Bearing, Nylon Inserts
for Go Karts

Heavy Duty

#MSRP $43

Product Description

3/4″ axle Steering Spindles, Brackets, Bearings nylon inserts for Go Kart, Dolly

Heavy Duty 3/4 inch! Jig welded Go Kart / Dolly Steering Spindles.

Complete Set – Left and Right 3/4″ axle spindles w/metal spacers, 4 nylon inserts, 2 spindle brackets, hex bolts, stop nuts, (4) four 3/4″ Flanged ball bearings included!

***NEW information – Our spindles can be used with steering mechanism “in front of” or “in back of” wheels. They can be installed directly to frame! Our lever arm can cross over the frame in either direction because there is NO FOLD on the lever arm (like most other spindles) that limits the turn radius of the spindle

** Four (4) 3/4″ Flanged ball bearings included! (Fits standard wheels- Just tap out your 5/8″ – tap in our 3/4″)
** 3/4″ axle diameter! – much more strength /durability than 5/8″ diameter axle

Axle length ~ 4″ for use with most standard wheels
Spindle Made with the more expensive D.O.M. Tubing (not pipe)
Spindle shaft ID ~ 3/4″ or 5/8″ with nylon flange washer insert (No metal on metal rubbing!)
Two (2) C- Channel Spindle Brackets (Install on frame of Go Kart, Lawn Mower….etc)
Spindle length w/ nylon flange washers ~ 3 3/8″ (apply this measurement to match your I.D. for spindle C brackets)
Tapped (threaded) 3/8″ hole on lever arm

5/8″ Axle Steering Spindle Set,
Brackets, Bearing,
Nylon Inserts for Go Kart

#MSRP $42

Product Description

Jig Welded 5/8″ x 4 1/4″ axle size Go Kart / Dolly Steering Spindles with nylon inserts

Heavy Duty Jig welded Go Kart / Dolly Steering Spindles axles with nylon inserts and wheel spacers

* Newly added – Steel wheel spacers with nylon inserts – No metal to metal rubbing!

5/8″ axle diameter
Axle length ~ 4″ for use with most standard wheels.

Spindle Made with the more expensive D.O.M. Tubing (not pipe)
Spindle shaft ID ~ 3/4″ or (5/8″ with nylon flange washer insert -No metal on metal rubbing!)

Spindle shaft height w/ nylon flange washers ~ 3 3/8″ (apply this measurement to match your I.D. for spindle C brackets)
Tapped(Threaded) 3/8″ hole on lever arm

2 &1/2″ Spindle height 5/8″ axle Steering
w/ nylon inserts Go Kart, Dolly

#MSRP $37

Product Description

LEFT AND RIGHT 2 1/2″ Spindle height, 5/8″ axle diameter Steering set w/ nylon inserts Go Kart, Dolly

Heavy Duty Jig welded Go Kart / Dolly Steering Spindle Set

2 &1/2″ Spindle shaft height w/ nylon flange washers

5/8 inch diameter axles, Removable steel wheel spacers and 8 nylon flange washers included!

***NEW information – Our spindles can be used with steering mechanism “in front of” or “in back of” wheels. They can beinstalled directly to frame! Our lever arm can cross over the frame in either direction because there is NO FOLD on the lever arm (like most other spindles) that limits the turn radius of the spindle

5/8″ axle diameter with 7/8″ shoulder for more strength /durability (not just a welded hex nut)

Axle length ~ 4″ for use with most standard wheels
Removable steel spacer with nylon insert
Spindle Made with the more expensive D.O.M. Tubing (not pipe)
Spindle shaft ID ~ 3/4″ or 5/8″ with nylon flange washer insert (No metal on metal rubbing!)
Tapped (threaded) 3/8″ hole on lever arm

*2 & 1/2″ Spindle shaft height w/ nylon flange washers (Apply this measurement to match your C bracket I.D.)
(See our other auctions for different spindle heights)

2 &1/2″ Spindle height 3/4″ axle Steering
w/ nylon inserts Go Kart, Dolly

#MSRP $37

Product Description

Heavy Duty Jig welded Go Kart / Dolly Steering Spindle

2 &1/2″ Spindle shaft height w/ nylon flange washers

3/4 inch diameter axles, Removable steel wheel spacers and 8 nylon flange washersincluded!

***NEW information – Our spindles can be used with steering mechanism “in front of” or “in back of” wheels. They can be installed directly to frame! Our lever arm can cross over the frame in either direction because there isNO FOLD on the lever arm (like most other spindles) that limits the turn radius of the spindle

3/4″ axle diameter with 7/8″ shoulder for more strength /durability (not just a welded hex nut)

Axle length ~ 4″ for use with most standard wheels
Removable steel spacer with nylon insert
Spindle made with the more expensive tubing
Spindle shaft ID ~ 3/4″ or 5/8″ with nylon flange washer insert (No metal on metal rubbing!)
Tapped (threaded) 3/8″ hole on lever arm

*2 & 1/2″ Spindle shaft height w/ nylon flange washers (Apply this measurement to match your C bracket I.D.)